Tips on Garden Tools Maintenance

There are many types of garden tools, but some of them are familiar to us, and some are not familiar to us. They play a great role in greening, especially with the rapid development of modern urbanization, garden greening has become a symbolic impression of a city. Of course, the tools related to garden construction are inseparable from these garden tools, and we have some understanding of their use and maintenance.

　　 Garden tools often bear very heavy work in use, so if they can extend their life to make them more convenient to use and maximize their functions, they must understand the relevant maintenance knowledge. For example, in winter, garden tools are rarely used. For lawn mowers, hedge trimmers or chainsaws that trim flowers and grasses, you must drain the oil in the fuel tank, and then fill in appropriate new oil according to the instructions, then remove the spark plugs, and add the oil. Then install the spark plug, and then wipe clean the dust and oil stains on the cutter head, machine body, etc., and place it in a suitable position. In the spring and summer season, the use of these tools will increase accordingly. First, check whether the screws or various parts of these machines are firmly installed and whether they are loose, and to see whether the oil is sufficient and does not need to be filled. Do not run at excessive speed when in use, and the oil used should be of reliable quality, clean and fresh. Non-professionals are not allowed to adjust the machine without authorization, remove the spark plug cap during refueling, repair and maintenance, do not smoke, and stay away from the source of fire. If the machine emits blue smoke during use, it is likely to be caused by the burning of the oil, it is likely that the oil has been added too much, and a part of it needs to be drained before use, or it may be caused by blocked air filters and unsharp blades. In addition, smoke can also be caused when the grass is too dense. At this time, the size of the pruning should be increased, and the burden on the engine can be reduced to solve this type of problem.

　　The lawn mower sometimes appears weak when mowing the lawn. First, clean it first. If it cannot be cleaned, replace the blade or sharpen the blade to make it sharp. If the center screw of the blade is not tightened, first check for damage, and then tighten the screw before use. Sometimes the grass-collecting effect of lawn mowers is not good due to the following reasons: firstly, it needs to be cleaned. When the dirt is blocked and airtight, it will also cause the grass to be collected. In addition, the blade is excessively worn, the blade cannot collect grass, and the engine is Excessive wear, large power loss and other reasons. When the lawn mower is in use, it will also shake. It may be that the blade is curled when it hits stones, tree roots and other hard objects during use, or the crankshaft is severely bent and the machine shakes. Use qualified gasoline and engine oil when using the hedge trimmer, and take a break for about ten minutes after each tank of engine oil is used up to ensure heat dissipation. When the brush cutter is in use, check the air filter and spark plug regularly to ensure the normal use of the machine.